User Tools

Site Tools


railway_modelling:kiha_23

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
railway_modelling:kiha_23 [2017/08/20 19:59] dmmediarailway_modelling:kiha_23 [2022/07/12 09:52] (current) – [Plans] dmmedia
Line 1: Line 1:
 ====== KiHa 23 ====== ====== KiHa 23 ======
  
-==== 10.08.2017 ====+===== Notes =====
  
 +==== 10.08.2017 ====
  
 {{ :railway_modelling:kiha23hom_original.jpg?nolink |}} {{ :railway_modelling:kiha23hom_original.jpg?nolink |}}
-== Changed KiHa 23 brought from Japan trip to HOm gauge from HO. Now looks much better and closer to prototype. ==+Changed KiHa 23 brought from Japan trip to HOm gauge from HO. Now looks much better and closer to prototype.
  
-This time I used [[railway_modelling:kiha_40|KiHa 40]] wheelsets, <del>but eventually will adjust KiHa 23 wheels as well</del>.+For this photo have used [[railway_modelling:kiha_40|KiHa 40]] wheelsets, but eventually I have adjusted KiHa 23 wheels as well.
  
 ==== 15.08.2017 ==== ==== 15.08.2017 ====
Line 17: Line 18:
 Researched micro coil solenoids and old mobile phone vibration motors use for automating couplers and doors. 0.04 mm enamelled wire is available on eBay in 100 g 9 km rolls. Coil resistance should be between 50 and 200 ohms. Magnetic power is proportional to turns count and current value. Researched micro coil solenoids and old mobile phone vibration motors use for automating couplers and doors. 0.04 mm enamelled wire is available on eBay in 100 g 9 km rolls. Coil resistance should be between 50 and 200 ohms. Magnetic power is proportional to turns count and current value.
  
-==== Plans ====+===== Plans =====
  
   * Add motor and replace or make one of the boggies motorized   * Add motor and replace or make one of the boggies motorized
Line 24: Line 25:
   * Add DCC   * Add DCC
   * Add sounds   * Add sounds
-  * Make doors open and close and link with DCC 
   * Replace couplers with Kadee or make them DCC controlled   * Replace couplers with Kadee or make them DCC controlled
   * Add exterior wiring   * Add exterior wiring
railway_modelling/kiha_23.1503259173.txt.gz · Last modified: 2017/08/20 19:59 by dmmedia