Differences

This shows you the differences between two versions of the page.

--- 3d_printing:usb_drive_case [2017/10/14 12:03] – dmmedia
+++ 3d_printing:usb_drive_case [2017/10/14 12:07] (current) – dmmedia
@@ Line 1: / Line 1: @@
-===== USB drive case =====
+====== USB drive case ======
 When USB drive failed, I have to open the original case to access drive internals. However opening the factory sealed case made it unusable. So after fixing the drive I had to make a new enclosure for it.
-The new enclosure was designed with Solidworks, converted into STL format and printed with Verbatim green PLA on Rigidbot 3D printer. It took two iterations to fit enclosure properly to the drive. The final design photo is below.
+The new enclosure was designed with [[http://www.solidworks.com/|Solidworks]], converted into STL format and printed with [[http://www.verbatim.com/prod/3D-printing/PLA%20Filament%201.75mm/verbatim-pla-filament-1.75mm-green-sku-55254/|Verbatim green PLA]] on [[3d_printing:rigidbot|Rigidbot]] 3D printer. It took two iterations to fit enclosure properly to the drive. The final design photo is below.
 {{ :3d_printing:img_1255.jpg?nolink&600 |USB drive enclosure}}