Projects

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 3D printer enclosure ======

3D printer enclosure is useful when working with plastics with high shrink factor. Keeping surrounding heat within enclosure makes plastic shrink less during printing and not to lose their contact with the printer bed.

Automatically ventilated enclosure can also keep dangerous fumes coming from some plastics in the controlled enviroment.

===== Plans =====

  * <del>Build enclosure</del>
  * Add ventilation to enclosure
  * Add automated temperature holding inside enclosure

===== In Progress =====

  * None

===== Done =====

==== 29.10.2017 ====

  * Enclosure is made modular and is built.

===== Results =====

Photo of enclosure in progress, made with Macrolon plastic boards:
{{https://gallery.dmmedia.org/_data/i/upload/2015/03/22/20150322195418-5323de1f-sm.JPG}}

Photos of completed enclosure:
{{https://gallery.dmmedia.org/_data/i/upload/2022/07/12/20220712113139-6c358285-sm.jpg}}
{{https://gallery.dmmedia.org/_data/i/upload/2022/07/12/20220712113141-909dd9b7-sm.jpg}}

Enclosure is based on Thingiverse design [[https://www.thingiverse.com/thing:1339874|for Perspex Acrylic Sheets]] and was changed to accommodate [[https://www.thingiverse.com/thing:5430287|Macrolon plastic board]] width